XF Series Horizontal Fluid Bed Dryer

Short Description:

Description Through operation and improvement for twenty years, it has play an active part in the fields of pharmaceutical, chemical, foodstuff industries, grain processing and so on. It consists of air filter, fluid bed, cyclone separator, bag filter, high speed centrifugal fan, operation table and so on. Because of the different raw material property, it is necessary to equip dust remover in accordance with particle needs. It may select cyclone separator and bag filter at the same time or o...


Product Detail

Factory Picture

Product Tags

Description

Through operation and improvement for twenty years, it has play an active part in the fields of pharmaceutical, chemical, foodstuff industries, grain processing and so on. It consists of air filter, fluid bed, cyclone separator, bag filter, high speed centrifugal fan, operation table and so on. Because of the different raw material property, it is necessary to equip dust remover in accordance with particle needs. It may select cyclone separator and bag filter at the same time or one of them. In general speaking, cyclone separator can be selected if the raw material is large and bag filter may be selected if raw material is light. Moreover, there is feeding device for your selection.

Explanation

All equipment should be placed in level and fixed with foundation screw on the ground. All parts should be sealed well; fan should be installed at outdoor or in the special noise silencing room. The fan can be adjusted slightly in accordance with particle conditions.

Applications

It is widely used for medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example, crude drug, tablet granule, Chinese medicine infusion, foodstuff of health protection, drinking infusion, feed, resin, citric acid and other powders. The suitable diameter of raw material will be 0.1-6mm. The best diameter of raw material will be 0.5-3mm.

Principle

Clean and hot air enters into fluid bed through distributor of valve plate. The wet raw material fed from feeder forms the boiling state by hot air. Because of the wide contact between hot air and raw materials, drying time is short. The air enters from front of bed, boiling in bed for several minutes, and discharged from other side of bed. The machine works in negative pressure.

Technical Parameter

tem/Type Evaporated moisture (kg/h) Power of fan (kw) Air pres
-sure (Pa)
Amo
-unt of air(m3/h)
Temper
-ature of inlet air (℃)
Max consum
-ption (J)
Overall size (m)L*W*H Feeding form
A B C
XF10 10-15 7.5 5.5×
103
1500 60-200 2.0×
108

3.5×
3.2
3.5×
3.5×
3

3.5×
3.5
1.pneumatic automatic transmission
XF20 20-25 11 5.8×
103
2000 60-200 2.6×
108
4.5×

4.2


3.2


4.5
XF30 30-40 18.5 7.1×
103
3850 60-200 5.2×
108


4.5


4.2


5
XF50 50-80 30 8.5×
103
7000 60-200 1.04×
109

4.8×
4.8

4.8×
4.5

4.8×
5

Note: The parameter of evaporated moisture is counted on situation that using 130℃ for drying 20% water content crystal plum. Specific parameter is depend on different raw material


  • Previous:
  • Next:

  • Factory Picture

  • 
    WhatsApp Online Chat !