LPG Series High-Speed Centrifugal Spray Dryer

Short Description:

Description Spray drying process is the widest used in the liquid forming process and in drying industry. The drying technology is most suitable for powder, particle products from solution, emulsion, SC and pumpable paste states material. For this reason, when the particle size and distribution of the final product, their residual water contents, the stacking density and particle shape must meet the precision standard, spray drying process is one of the most desired processes. Features 1. At ...


Product Detail

Factory Picture

Product Tags

Description

Spray drying process is the widest used in the liquid forming process and in drying industry. The drying technology is most suitable for powder, particle products from solution, emulsion, SC and pumpable paste states material. For this reason, when the particle size and distribution of the final product, their residual water contents, the stacking density and particle shape must meet the precision standard, spray drying process is one of the most desired processes.

Features

1. At a high speed of drying, after spraying of the material liquid, the surface area will be increased greatly. In the hot air flow, 95%-98% of water can be evaporated at a moment. The time of completing the drying needs only several seconds.

2. This is especially suitable for drying the heat sensitive materials. Its final products own good uniformity, mobility and dissolving capacity. And the final products are high in their purity and good in their quality.

3. The production procedures are simple and the operation and control are easy. The liquid with the moisture contents 40-60% (for special materials, the contents may reach 90%) can be dried into the powder of particle products for one time. After drying, there is no need for crushing and sieving, so as to reduce operation procedures in the production and to enhance product purity. The product particle diameters, looseness and water contents can be adjusted through changing the operation condition in a certain scope. It is very convenient to carry out control and management.

Principle

After filtering and heating, the air enters into air distributor on top of the drier. The hot air enters into the drying room in spiral form and uniformly. By passing through high-speed centrifugal atomizer on top of tower, the material liquid will rotate and be sprayed into the extremely fine mist liquid beads. Through the very short time of contacting with heating air, the material can be dried into final products. The final products will be discharged continuously from the bottom of drying tower and from cyclone separator. The waste gas will be discharged from exhaust fan.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Technical Parameter

Item/parameters/type

LPG

5

25

50

100

150

200-2000

Temperature of inlet port(℃)

140-350 automatically controlled

Temperature of outlet port(℃)

80-90

Max capacity of evaporation moisture (kg/h)

5

25

50

100

150

200-2000

Transmission form 
of centrifugal atomizer

Electric

Mechanical transmission or electric

rotating speed rpm

25000

18000

18000

18000

15000

8000-15000

Diameter of spray disc (mm)

50

120

120

120

150

180-340

Heating resource

Electric

Electric

Electric+
steam, fuel 
oil and gas

Electric
+steam

Electric+
steam, fuel 
oil and gas

Settled by customer

Max electrical heating power (kw)

18

36

60

81

99

Decided according to the situation

Overall size (L*W*H) (m)

1.8×0.93
×2.2

3×2.7
×4.26

3.7×3.2
×5.1

4.6×4.2
×7

5.5×4.5
×6

 


  • Previous:
  • Next:

  • Factory Picture

  • 
    WhatsApp Online Chat !